Rotary Cams Air Solenoid for Dual Stage Flow; Gosling 4-way standard pushbutton holes accept

4-way standard pushbutton holes accept all brands of oil-tight pushbuttons

Operating Pressure: 6000 psi

A longer motor shaft coupler is required for WG8/10 systems

26cm) long and uses a rubber o-ring

of valve positions: 4

Rotary Cams Air Solenoid for Dual Stage Flow; Gosling 4-way standard pushbutton holes acceptRotary Cams, made or hard anodized aluminum, are used on both the 1st and 2nd operation rotary cylinders. These parts slide onto the rotary cylinder's driveshaft and key stock and is secured using a M6 Set Screw. These specific cams are only available for Standard Evolution Series, Legacy WGC 50 100 250, WG8 10, and Fusion Seamers set up to run 202 and 206 lid sizes. If you need rotary cams for Gosling or Quick Change seamers OR need 204 sized rotary