CP Seal Height Rod on/off Flow control valve

Flow control valve

Inner Ring Width: 0

211 diameter ("Stubby") cans

Not compatible with WG8/10 or Gosling seamers

The steel Swing Arm Bearing presses into the Swing Arms on all Evolution Series

CP Seal Height Rod on/off Flow control valveThe CP Seal Height Rod (AKA Tapped Linear Motion Shaft) is used on all Fusion Counter Pressure systems and is used to guide the Fill Head Raise Plate as it moves up and down. All are turned, ground, and polished to tight diameter and straightness tolerances. The surface is hardened, so they stand up to repeated motion while keeping their center soft enough to absorb stress from shifting loads. Chamfered edges remove sharp corners at the end of these